ENGINEERED & APPROVED BY HINO MOTORS LIMITED

FOR USE IN ALL HINO TRUCKS | ALL MODEL YEARS

HINO GENUINE SYNTHETIC BLEND ENGINE OIL:

Achieves a new standard for today’s high performance diesel engine oils. Its advanced protection technology breaks the mold for low temperature flow, extreme wear protection, breakdown resistance, reduced deposits & overall top shelf quality.

WEAR REQUIREMENTS:

Hino Genuine Oil far exceeds the CK-4 wear requirements ensuring long term engine performance & reliability.

EMISSION SYSTEM COMPLIANCE:

This special, low ash formulation reduces the blocking of particulate filters and the poisoning of exhaust after-treatment devices, helping to maintain vehicle emission compliance.

FUEL ECONOMY:

Independent test results have proven that Hino Genuine Oil provides notable fuel economy benefits when compared to 15W-40 viscosity products.

EXTENDED OIL LIFE:

Hino Genuine Oil provides extended drain intervals (up to 20,000 miles), keeping your truck where it belongs – moving down the road.

HINO GENUINE COOLANT

CHANGE INTERVALS UP TO 500,000 MILES. PROTECTION YOU CAN RELY ON.

ENGINEERED FOR YOUR HINO TRUCK UP TO MODEL YEAR 2021

Hino LLC EX-PLUS is a high performance ethylene glycol base Long life coolant engineered specifically for Hino trucks.  Formulated to work specifically with the metals and  non-metal materials in Hino engines, Hino Blue and Pink Coolants not only reduce cavitation erosion but provide long life protection.

500,000 MILE CHANGE INTERVAL: CONVENTIONAL

Hino Blue Coolant  for Hino’s Conventional Models (238-338) provides a 4 year/500K change Interval

360,000 MILE CHANGE INTERVAL: CAB-OVER

Hino Pink Coolant  for Hino’s Cab-over Models (155-195) provides a 3 year/360K change Interval

CLIMATE CONTROL: Hino Genuine Coolants have excellent anti-freeze performance and over-heat prevention for all climates.

CLIMATE FRIENDLY:  Coolant does not contain the inhibitors (silicate, amine, nitrite, and etc.) which may cause environmental issues & problems in cooling systems.

NON-METAL COMPATIBILITY:  Coolant is compatible with non-metal materials (rubber, resin parts) and performs well with these materials.

HINO GENUINE FILTERS

FOR HINO ENGINES UP TO MODEL YEAR 2021

UP TO 20% HIGHER CAPACITY THAN

OTHER BRANDS.

ENGINEERED FOR YOUR HINO ENGINE

Hino Genuine Oil Filters are engineered for the reduced oil amounts that are unique to Hino engines. They are specifically designed for the higher fluid cycles that less oil requires and the longer drain intervals of Hino engines – the result: Hino Filters deliver up to 20% higher capacity than other filters on the market. Hino Genuine Filters also lead the market with efficiency in the 30 to 40um micron range which is necessary to provide the right level of protection. The bottom line? If you’re not using Hino Genuine Filters you may be damaging your engine.

HIGH CAPACITY

Hino Filters deliver the highest capacity on the market. Low capacity filters mean a shorter filter life and higher potential for system bypass – a condition that allows unfiltered lubricants to enter the engine.

HIGH EFFICIENCY

Hino Filters are leaders in efficiency in the 30-40um micron range for particulates. Low efficiency means a lack of protection and higher component wear.

EFFICIENCY & PRESSURE DIFFERENTIAL (FLOW) ENGINEERING

The Hino Trucks Genuine Oil filter has nearly a 100% efficiency rating at 30 microns, while maintaining the lowest pressure differential on the market (to allow proper oil flow to the engine). Lower efficiency or higher pressure differential will lead to engine damage.